电磁兼容EMC国家标准标准

Standardization is the driving factor in EMC business. EM TEST participates in standard committee groups from the very beginning. In 1987 we started as an active member in TC6/WG 4 creating the standards IEC 801-2 for ESD, IEC 801-3 for rf field, IEC 801-4 for EFT/burst, IEC 801-5 for Surge and IEC 801-6 for induced conducted immunity.

Benefits: 
EM TEST is always on the actual level of information and so are our customers.
EM TEST works now on standards, which will be published in the future.
We have the background information which we design into our products for the benefit of our customers.
We are part of the international network of standardization bodies and therefore have relations to many EMC experts world-wide.
Our EMC seminars are always dealing with the most actual matters in EMC. Maybe we do not know everything but we know where to get the information from. 

Target: 
Testing experience of our customers is an important knowledge which we try to bring into the different standards.
We are trying to enable our customers to work efficiently and as easy as ever possible and at the same time to reduce failures during testing as much as possible.

the structure of EMC standards
EMC requirements are specified in a vast number of standard documents issued by various committees and organizations. The documents are organized as follows: 

Basic standards: 
Describe the phenomenon, characterize the test equipment and give guidance how tests shall be performed and documented. Basic standards like IEC 61000-4-x form the lowest level in standard's hierarchy. 

Generic standards: 
Specify test levels for a certain range of application, referring to the Basic Standards for general information. Generic standards give minimum requirements, e.g. for CE Mark (EN 61000-6-1). Generic Standards stand above the Basic standards. 

Product Family standards: 
Are used where exist for a certain category of products. They specify test levels and performance criteria. EN 61326, for instance, forms such a Product Family standard dealing with the EMC requirements of equipment for measurement, control laboratory use. 

Product standards: 
Are the most preferred standards as they give strict requirements for a certain product. EN 61800-3 for instance is a Product Standard for adjustable speed electrical power drive systems. Apart from the requirements for EMC this standard also defines special test procedures.
Product Standards form the highest level in standard's hierarchy.

various manufacturer standards
Apart from these four categories there are international and national standards as well as manufacturer standards. Especially in the automotive industry each and every manufacturer has his own EMC requirements which are absoluy compulsory for all suppliers to them. They might refer to National or International standards but often include specific requirements to be fulfilled.

If you need support on a specific test requirement or seek information about a specific standard document please link to the standard organization of your interest. If you cannot find the adequate link please contact us.
Connections we can recommend
标准化是EMC业务的驱动因素。EM测试从一开始就参与标准委员会小组。1987我们开始在tc6 / WG 4创建标准IEC 801-2 ESD的活跃成员，IEC 801-3射频领域，IEC 801-4 EFT /爆裂，IEC 801-5浪涌和IEC 801-6进行免疫诱导。

效益：
EM测试总是在实际的信息水平上，我们的客户也是这样。
EM测试现在的标准，将在未来出版。
我们有背景资料，我们设计到我们的产品，以造福于我们的客户。
我们是标准化机构网络的一部分，因此与世界各地的许多EMC专家有关系。
我们的EMC研讨会总是处理EMC中zui实际的问题。也许我们什么都不知道，但我们知道从哪里得到信息。

目标：
测试客户的经验是一个重要的知识，我们试图纳入不同的标准。
我们正努力使我们的客户尽可能地地工作，同时尽可能减少测试过程中的失败。

电磁兼容标准的结构
EMC的要求是由许多委员会和组织发布的大量标准文件所规定的。文件的组织如下：

基本标准：
描述这一现象，描述测试设备，并指导如何进行测试和记录。基本标准如IEC 61000-4-x形成标准的zui低层次。

通用标准：
参照一般信息的基本标准，为一定范围的应用程序测试级别。通用标准为zui低要求，例如CE Mark（EN 61000-6-1）。通用标准高于基本标准。

产品族标准：
用于某类产品的存在。它们测试级别和性能标准。例如，EN 61326形成了这样一个产品族标准，用于测量测量设备的EMC要求，控制实验室使用。

产品标准：
是*先的标准，因为它们对某一产品给予严格的要求。EN 61800-3实例是一个调速电气传动系统产品标准。除了EMC的要求外，本标准还规定了特殊的测试程序。
产品标准是标准层次结构中的zui高层次。

各制造商标准
除了这四个类别外，还有标准和国家标准以及制造商标准。特别是在汽车工业中，每一个制造商都有自己的EMC要求，这对所有供应商都是强制性的。它们可能涉及国家或标准，但往往包括要完成的具体要求。

Glossary - Standards
Here you get a short reference to the selected standard. In addition, listed below are all EM TEST solutions for this tests. Please select the required standard:
术语标准

在这里您可以得到所选标准的简短参考。此外，下面列出了所有的EM测试解决方案。请选择所需的标准：
ANSI/IEEE C37.90
ANSI/IEEE C62.41
EN 61000-3-2
EN 61000-3-3
EN 61000-4-10
EN 61000-4-13
EN 61000-4-16
EN 61000-4-29
EN 61000-4-6
EN 61000-4-8
EN 61000-4-9
EN 61000-4-18
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-4-10
IEC 61000-4-12
IEC 61000-4-13
IEC 61000-4-16
IEC 61000-4-29
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-9